 |
 |
WMP-50 (PSP) |
| Poly Scrim Polyester is a .0015" thick UV Stabilized White Polypropylene facing with fiberglass scrim reinforcement and a .0005" thick Metallized Polyester backing. It has excellent strength and puncture resistance. It has a decorative, embossed finish as well as good low temperature workability. It is an excellent Vapor Barrier. Water Vapor transmission rate (ASTM-E-96) of .02 Perms. Light Reflectivity (ASTM C-523, illuminant D-6500 = 80%. Cold Weather Workability = 20 deg. F. Bursting strength of 120 psi. |
"R" Factor |
Thickness |
Available Widths | Length |
R-10 |
3.0" |
36", 48", 60", 72" |
Custom Laminated to Length. |
*R-11 |
3.5" |
36", 48", 60", 72" |
Custom Laminated to Length. |
R-13 |
4.0" |
36", 48", 60", 72" |
Custom Laminated to Length. |
*R-16 |
5.0" |
36", 48", 72" |
Custom Laminated to Length. |
R-19 |
6.0" |
36", 48", 60", 72" |
Custom Laminated to Length. |
* Special order item, minimum order quantities may apply. |
Tabs |
| Tab options are (1) 6" Tab or 2 - 3" Tabs. 1 - 6" Tab will be provided on one side of the insulation rolls with no tab on the other side of the roll. Usually 1 - 6" Tab is used when the erector is going to use spray adhesive to seal the insulation roll side joints. 2 - 3" Tabs will be provided on both sides of the insulation rolls. 2 - 3" Tabs are usually used when the insulation roll side joints are going to be folded and stapled. Unless specifically called out in a specification, this is strictly a preference of the erector. |
 |
Do you have a question and need a quick Answer? E-mail a Consultant and get a Quick Response! Steel-Building-Questions@visionsteelbuildings.com |