|
- VIsion Mark Wall System is offered in all colors for the 26-gauge panels. Shell White is the only available color for 24-gauge panels.
|
- Finished panels will have four major corrugations 1" high at 12" on center, with a 2 1/4" x 1" deep depression between each major corrugation.
|
- Vision Mark panels are roll formed at 26-gauge or 24-gauge, 50,000 PSI minimum yield steel (ASTM A653 Grade 50) with G-90 zinc coating (ASTM Galvanized Specification A924) or Aluminum-Zinc alloy coating (ASTM Specification A792).
|
- Vision Mark architectural wall panels have a unique side lap feature. The panel ribs are designed to go in rather than out and one panel edge has a 360 degree hem that fits into the leading side lap rib. Panel side laps are very hard to find because of this feature.
|
- Factory colored Vision Mark panels 26-gauge or 24-gauge, 50,000 PSI minimum yield steel (ASTM A653 Grade 50) with G90 zinc coating (ASTM Galvanized Specification A924) or Aluminum-Zinc alloy coating (ASTM Specification 792).
|
- Vision Mark wall panels will be one-piece construction from base to building eave with a maximum length of 32'. All end laps will be a minimun of 4" and shall occur at a supporting member.
|
|
|
