Vision Steel Buildings offer Slide Doors in any size up to 24' Wide and 20' High.
Slide Doors consist of framed opening jambs and header, door leaf framing and panel, Cannon Ball track and trolleys, support track, door guides, lock assembly, flashing, clips, bolts and fasteners, shipped knocked down for field assembly.
Framed opening jambs and header will be primered material. Slide door leaf framing will be galvanized, except for side rails, which may be primered only, depending on wind load. Door leaf panel matches wall color and all other flashing is Shell White. Optional hood flash is available.

(1) Door jambs may not be located any
closer than 1'-0 to any frame or
endwall column and 1'-4 to any corner
column.

(2) Maximum door height must be held 2'-0
below the building eave height.

(3) An open door leaf may not cantilever
more than 3'-0 beyond the building
corner.

Sidewall Restrictions...In addition to the General Restrictions above, the maximum door width available in the sidewall is 15'-0 in 20' bays, and 20'-0 in 25' bays.
Slide Doors are offered for use only on Vision Steel Buildings utilizing Dura-Rib wall panels.